HIGH PERFORMANCE AND AFFORDABLE GLASS MACHINERY
Max. workable glass sheet mm. 4000 x 2600  (157” x 102”).  Also available in SL42-26 (165” x 102”) and SL42-28 (165” x 110”) Workable thickness From 2 to 19 mm (1/16 to 3/4 in). Machine can cut every kind of glass (except tempered) Equipped with: Control panel with incorporated independent Computer WiFi and 21" Touch Screen , software packet with optimization program developed in Multitasking systems  with 250 parametric preconstructed shapes, user graphic interface for the managing of the cutting cycle and machine monitoring , security systems following the laws, handbook in English.. Safety of the glass presence: A sensor is placed on the cutting head, to stop the machine in case of lack of glass sheets Management of mechanisms: Immediate and controlled braking of the bridge and the cutting head, as soon as an emergency occurs. Weight Kg. 2200  (4850 lbs) Work surface height: Adjstable from 890 to 960 mm (34.65 to 38.19 in) Maximum installed power  Kw 8 Performance: Maximum speed of the bridge and cutting head 180 m/min (590 ft/min) Max. acceleration 0.8 sec. from 0 to max. speed Max. deceleration 0.8 sec. From max. speed to 0 Accuracy: Max. difference in length between two diagonals for an area bigger than 2mq (21.528 sq.ft.) (glass 3 mm thick) (1.118 in.) +/-0.20 mm (0.0196 in) Rectilinearity tolerance (glass 3 mm thick) (1.118 in.) +/- 0.15 mm (straight cutting) +/-0.20 mm ( shape cutting).
Sliding systems: Sliding systems of the bridge are a rack and pinion system. The racks and the pinions are tempered and re-machined for greater accuracy and decreased wear over time. They have a ± 0.02 mm tolerance over a 1.20 mt (47.24 in) length. The teeth on the racks are installed upside down to keep dust and dirt out. A pinion is placed on either side of the bridge (two in all), to always keep the bridge perpendicular to the cutting table during the acceleration and deceleration phases of cutting. On linear guide and rack are applied to both sides of the table, to obtain a overall bridge stability during the entire cutting cycle.
Cutting Bridge The cutting bridge is made of rigid Steel. The whole system is very stable and insensitive to temperature changes, assuring a minimum wear and tear. Cutting trolley is made from aluminium. The cutting head is made with special machines with hundredth tolerances. Going up and down system of the cutting head is guided by a system with re- circulation of ball-bearings, to reduce the friction as much as possible and guarantee the cutting  head responds to glass sinkings.
Glass sheet squaring: The alignment of glass sheet is automatic trought laser 3Directions. Work surface Made in very hard wood, covered with woollen felt of high density and compactness, 4 mm thick (0.157 in). Laser scanning (Optional Included): Laser System for copying of the shapes, of any material, with double control of the correct survey of the points.
User Interface: Multitasking systems, control of  three interpolated axles, easy-to-use, with icons and buttons of the relevant command, with Computer WiFi and 21" Touch Screen. Optimisation program: PerfectCut Optimization software.  Includes a 250 parametric shapes library, import/export data.
CNC Shape Glass Cutting - Stand Alone with Air floatation
Stand Alone cnc Glass Cutting - Load, Cut and Breakout all on the same table! - Full Shape Cutting Capability! Max. workable glass sheet mm. 4000 x 2600 (157” x 102”)  - Fantastic Value Also available in Models: SA42-28 (165” x 110”) and SA26-19 (102” x 75”). Workable thickness From 2 to 19 mm (1/16 to 3/4 in). Machine can cut every kind of glass (except tempered) Equipped with: Control panel with incorporated independent Computer WiFi and 21" Touch Screen , software packet with optimization program developed in Multitasking systems  with 250 parametric preconstructed shapes, user graphic interface for the managing of the cutting cycle and machine monitoring , hydraulic tilting surface, air cushion,  ventilator for the movement of the sheet on the surface, , double zero for the cutting of laminated glass, security systems following the laws,handbook in English. Safety of the glass presence: A sensor is placed on the cutting head, to stop the machine in case of lack of glass sheets Management of mechanisms: Immediate and controlled braking of the bridge and the cutting head, as soon as an emergency occurs. Weight Kg. 2200 (4850 lb) Work surface height: Adjstable from 890 to 960 mm (34.65 to 38.19 in) Maximum installed power  Kw 10 Performance: Maximum speed of the bridge and cutting head 180 m/min (590 ft/min) Max. acceleration 0.8 sec. from 0 to max. speed Max. deceleration 0.8 sec. From max. speed to 0 Accuracy: Max. difference in length between two diagonals for an area bigger than 2m sq (21.528 sq.ft.) (3 mm thick) (1.118 in.) +/-0.20 mm (0.0196 in) Rectilinearity tolerance (glass 3 mm thick) (1.118 in.) +/- 0.15 mm (straight cutting) +/-0.20 mm ( shape cutting).
Max. workable glass sheet mm. 6100 x 3300  (240” x 130”). Workable thickness From 2 to 19 mm (1/16 to 3/4 in). Machine can cut every kind of glass (except tempered). Equipped with: Control panel with incorporated independent Industrial Computer WiFi and 21" Touch Screen , software packet with optimization program developed in Multitasking systems  with 250 parametric preconstructed shapes, user graphic interface for the managing of the cutting cycle and machine monitoring , security systems following the laws, handbook in English.. Safety of the glass presence: A sensor is placed on the cutting head, to stop the machine in case of lack of glass sheets Management of mechanisms: Immediate and controlled braking of the bridge and the cutting head, as soon as an emergency occurs. Weight Kg. 3000 (6614 lb) Work surface height: Adjstable from 890 to 960 mm (34.65 to 38.19 in) Maximum installed power  Kw 12 Performance: Maximum speed of the bridge and cutting head 180 m/min (590 ft/min) Max. acceleration 0.8 sec. from 0 to max. speed Max. deceleration 0.8 sec. From max. speed to 0 Accuracy: Max. difference in length between two diagonals for an area bigger than 2mq (21.528 sq.ft.) (glass 3 mm thick) (1.118 in.) +/-0.20 mm (0.0196 in) Rectilinearity tolerance (glass 3 mm thick) (1.118 in.) +/- 0.15 mm (straight cutting) +/-0.20 mm ( shape cutting).
Why Buy Vetromac?  Great features, build quality and support at a good price!
CNC Shape Glass Cutting - Stand Alone with Air floatation
CNC Shape Glass Cutting - Stand Alone with Air floatation
High Production CNC Shape Glass Cutting  -Fixed Tops with Belt Transport (Require Loading and Breakout Table)
Layout SA26-19
Layout SA40-26
Made in Italy Made in Italy Made in Italy
New Concept of Production and Assembly We have developed a new concept of building machines. Every single part of the machine is designed with 3D CAD technology, processed by CAD CAM and machined with CNC Working Center. This innovative system is the only one that can guarantee perfect uniformity and constant quality of all the machines that are being built and allows every single part of the machine to be easily replaced if needed, even the felt table surface. Machine assembly is divided into specific steps, controlled by a management software chart, which supports and guides our technicians during the various stages of assembly, the  following picture is an example of the assembly steps:
V
Layout SL40-26
Layout SL42-26
Layout SL42-28
Made in Italy
CNC Shape Glass Cutting - Stand Alone with Air floatation
Manual Glass Cutting Tables - Made in Canada - To Order
Manual Glass Cutting Tables Well designed and made.  Solid tubular metal frame construction.  Common sizes: Glass sheets up to 130” x 96” 145” x 102” (Other size available upon request) Popular options include: - Air Floatation (standard or for glass 3/8” or thicker) - Tilting Top (Manual with counter-balance or Pneumatic) - Breaker Bars (manual or pneumatic)
Heavy Duty Steel Structure to ensure long life and stability.  Various sizes and models available
Heavy Duty Steel Structure to ensure long life and stability.  Various sizes and models available
Cutting line layout examples
Layout SL60-33
Model SA40-26  (Fixed Top with Air Floatation and Loading Arms)
Model SL40-26  (Belt Transport for Production Line)
Model SL60-33  (Belt Transport for Jumbo Production)
Automatic Glass Loader
Glass Breakout Tables
Premium Italian Glass Cutting Tables at an affordable price!
Automatic Glass Loader Automatic Glass Loader Breakout Table Breakout Table
Serving Canada and USA since 2008 Over 30 years of Glass fabricating experience
CONTACT US
T: +1-416-342-7547 F: +1-905-492-2230 Toll Free: F: 1-888-222-6339
PRODUCTS
© 2015 Atwood Sales Inc.  All rights reserved.
HIGH PERFORMANCE AND AFFORDABLE GLASS MACHINERY
Max. workable glass sheet mm. 4000 x 2600  (157” x 102”).  Also available in SL42-26 (165” x 102”) and SL42-28 (165” x 110”) Workable thickness From 2 to 19 mm (1/16 to 3/4 in). Machine can cut every kind of glass (except tempered) Equipped with: Control panel with incorporated independent Computer WiFi and 21" Touch Screen , software packet with optimization program developed in Multitasking systems  with 250 parametric preconstructed shapes, user graphic interface for the managing of the cutting cycle and machine monitoring , security systems following the laws, handbook in English.. Safety of the glass presence: A sensor is placed on the cutting head, to stop the machine in case of lack of glass sheets Management of mechanisms: Immediate and controlled braking of the bridge and the cutting head, as soon as an emergency occurs. Weight Kg. 2200  (4850 lbs) Work surface height: Adjstable from 890 to 960 mm (34.65 to 38.19 in) Maximum installed power  Kw 8 Performance: Maximum speed of the bridge and cutting head 180 m/min (590 ft/min) Max. acceleration 0.8 sec. from 0 to max. speed Max. deceleration 0.8 sec. From max. speed to 0 Accuracy: Max. difference in length between two diagonals for an area bigger than 2mq (21.528 sq.ft.) (glass 3 mm thick) (1.118 in.) +/-0.20 mm (0.0196 in) Rectilinearity tolerance (glass 3 mm thick) (1.118 in.) +/- 0.15 mm (straight cutting) +/-0.20 mm ( shape cutting).
Sliding systems: Sliding systems of the bridge are a rack and pinion system. The racks and the pinions are tempered and re-machined for greater accuracy and decreased wear over time. They have a ± 0.02 mm tolerance over a 1.20 mt (47.24 in) length. The teeth on the racks are installed upside down to keep dust and dirt out. A pinion is placed on either side of the bridge (two in all), to always keep the bridge perpendicular to the cutting table during the acceleration and deceleration phases of cutting. On linear guide and rack are applied to both sides of the table, to obtain a overall bridge stability during the entire cutting cycle.
Cutting Bridge The cutting bridge is made of rigid Steel. The whole system is very stable and insensitive to temperature changes, assuring a minimum wear and tear. Cutting trolley is made from aluminium. The cutting head is made with special machines with hundredth tolerances. Going up and down system of the cutting head is guided by a system with re- circulation of ball-bearings, to reduce the friction as much as possible and guarantee the cutting  head responds to glass sinkings.
Glass sheet squaring: The alignment of glass sheet is automatic trought laser 3Directions. Work surface Made in very hard wood, covered with woollen felt of high density and compactness, 4 mm thick (0.157 in). Laser scanning (Optional Included): Laser System for copying of the shapes, of any material, with double control of the correct survey of the points.
User Interface: Multitasking systems, control of  three interpolated axles, easy-to-use, with icons and buttons of the relevant command, with Computer WiFi and 21" Touch Screen. Optimisation program: PerfectCut Optimization software.  Includes a 250 parametric shapes library, import/export data.
Stand Alone cnc Glass Cutting - Load, Cut and Breakout all on the same table! - Full Shape Cutting Capability! Max. workable glass sheet mm. 4000 x 2600 (157” x 102”)  - Fantastic Value Also available in Models: SA42-28 (165” x 110”) and SA26-19 (102” x 75”). Workable thickness From 2 to 19 mm (1/16 to 3/4 in). Machine can cut every kind of glass (except tempered) Equipped with: Control panel with incorporated independent Computer WiFi and 21" Touch Screen , software packet with optimization program developed in Multitasking systems  with 250 parametric preconstructed shapes, user graphic interface for the managing of the cutting cycle and machine monitoring , hydraulic tilting surface, air cushion,  ventilator for the movement of the sheet on the surface, , double zero for the cutting of laminated glass, security systems following the laws,handbook in English. Safety of the glass presence: A sensor is placed on the cutting head, to stop the machine in case of lack of glass sheets Management of mechanisms: Immediate and controlled braking of the bridge and the cutting head, as soon as an emergency occurs. Weight Kg. 2200 (4850 lb) Work surface height: Adjstable from 890 to 960 mm (34.65 to 38.19 in) Maximum installed power  Kw 10 Performance: Maximum speed of the bridge and cutting head 180 m/min (590 ft/min) Max. acceleration 0.8 sec. from 0 to max. speed Max. deceleration 0.8 sec. From max. speed to 0 Accuracy: Max. difference in length between two diagonals for an area bigger than 2m sq (21.528 sq.ft.) (3 mm thick) (1.118 in.) +/-0.20 mm (0.0196 in) Rectilinearity tolerance (glass 3 mm thick) (1.118 in.) +/- 0.15 mm (straight cutting) +/-0.20 mm ( shape cutting).
Max. workable glass sheet mm. 6100 x 3300  (240” x 130”). Workable thickness From 2 to 19 mm (1/16 to 3/4 in). Machine can cut every kind of glass (except tempered). Equipped with: Control panel with incorporated independent Industrial Computer WiFi and 21" Touch Screen , software packet with optimization program developed in Multitasking systems  with 250 parametric preconstructed shapes, user graphic interface for the managing of the cutting cycle and machine monitoring , security systems following the laws, handbook in English.. Safety of the glass presence: A sensor is placed on the cutting head, to stop the machine in case of lack of glass sheets Management of mechanisms: Immediate and controlled braking of the bridge and the cutting head, as soon as an emergency occurs. Weight Kg. 3000 (6614 lb) Work surface height: Adjstable from 890 to 960 mm (34.65 to 38.19 in) Maximum installed power  Kw 12 Performance: Maximum speed of the bridge and cutting head 180 m/min (590 ft/min) Max. acceleration 0.8 sec. from 0 to max. speed Max. deceleration 0.8 sec. From max. speed to 0 Accuracy: Max. difference in length between two diagonals for an area bigger than 2mq (21.528 sq.ft.) (glass 3 mm thick) (1.118 in.) +/-0.20 mm (0.0196 in) Rectilinearity tolerance (glass 3 mm thick) (1.118 in.) +/- 0.15 mm (straight cutting) +/-0.20 mm ( shape cutting).
Why Buy Vetromac?  Great features, build quality and support at a good price!
CNC Shape Glass Cutting - Stand Alone with Air floatation
High Production CNC Shape Glass Cutting Fixed Tops with Belt Transport (Require Loading and Breakout Table)
Layout SA26-19
Layout SA40-26
Made in Italy Made in Italy Made in Italy
New Concept of Production and Assembly We have developed a new concept of building machines. Every single part of the machine is designed with 3D CAD technology, processed by CAD CAM and machined with CNC Working Center. This innovative system is the only one that can guarantee perfect uniformity and constant quality of all the machines that are being built and allows every single part of the machine to be easily replaced if needed, even the felt table surface. Machine assembly is divided into specific steps, controlled by a management software chart, which supports and guides our technicians during the various stages of assembly, the  following picture is an example of the assembly steps:
V
Layout SL40-26
Layout SL42-26
Layout SL42-28
Made in Italy
CNC Shape Glass Cutting - Stand Alone with Air floatation
Heavy Duty Steel Structure to ensure long life and stability.  Various sizes and models available
Heavy Duty Steel Structure to ensure long life and stability.  Various sizes and models available
Cutting line layout examples
Layout SL60-33
Model SA40-26  (Fixed Top with Air Floatation and Loading Arms)
Model SL40-26  (Belt Transport for Production Line)
Model SL60-33  (Belt Transport for Jumbo Production)
Automatic Glass Loader
Glass Breakout Tables
Premium Italian Glass Cutting Tables at an affordable price!
PRODUCTS
© 2015 Atwood Sales Inc.  All rights reserved.
CONTACT US
T: +1-416-342-7547 F: +1-905-492-2230 Toll Free: F: 1-888-222-6339
Serving Canada and USA since 2008 Over 30 years of Glass fabricating experience
Manual Glass Cutting Tables - Made in Canada - To Order
Manual Glass Cutting Tables Well designed and made.  Solid tubular metal frame construction.  Common sizes: Glass sheets up to 130” x 96” 145” x 102” (Other size available upon request) Popular options include: - Air Floatation (standard or for glass 3/8” or thicker) - Tilting Top (Manual with counter-balance or Pneumatic) - Breaker Bars (manual or pneumatic)